Prestaflator Digital Bicycle Tire Inflator – Air Compressor Tool
$119.99
Only 1 left in stock
Prestaflator Pro Digital Tyre Inflator
The new Prestaflator Digital is made possible by our new Rapid Response™ Digital Gauge. During inflation, the gauge is capable of showing immediate changes in pressure, enabling fast inflation – now with supreme accuracy. The gauge uses highly accurate, non-wearing circuitry for pressure readings, so it does not wear out or lose accuracy like traditional Dial gauges. Highly accurate readings are across the whole range, making this tool excellent for Fat Tire, Cyclocross, MTB as well as Road Bikes. Easy Tool-less replacement of the two CR2032 batteries (included).
Excellent Air Flow control.
The Prestaflator is designed with a long-throw trigger valve. Use a light squeeze or brief, rapid shots to gently inflate Bike tires to your desired pressure over a few seconds. A full squeeze on the trigger provides maximum pressure for seating tubeless tires. Designed for MTB & Road tires with a wide range of pressure requirements.
Quick-Click2™ Head for Tubeless & removable cores.
The Prestaflator Head includes a removable cap with our new Quick-Click2™ push/pull head. Quick-Click2™ is the fastest and easiest Presta valve connection. Our original Quick-Click™ and our new Quick-Click2™ heads should be used with all Tubeless applications and any tubes with removable valve cores.
1way / 2way Presta Inflation Head inside.
Inside the Prestaflator head is our 1 way / 2 way Spin-on Presta design for inflating and deflating tires with traditional Presta valves. A few quick turns secure the head to the cap threads on the Presta valve and provide an air-tight seal. It has an internal sliding action. Push the hose towards the head to push the Presta valve air release button without removing the head. This allows the Prestaflator to take a tire pressure reading without being connected to an Air Compressor. It can also let air out of the tire by simultaneously pushing the hose and pressing the air release button on the side of the Prestaflator handle. When you inflate or take a pressure reading, the head automatically slides back away from the Presta button. This returns the Presta valve to its natural one-way operation. This means there’s absolutely NO pressure loss when you disconnect the head from the tire.
The best accessories are included to make it a multi-purpose tool:
Remove the cap to screw-on Prestaflator accessory heads quickly without tools.
- Schrader Auto Head
- Big Quick-Click™ Presta Head
- Safety Blower Tip
Quick-Click2™ has the best seal plus the easiest installation & removal of any Disc head. Smallest head – fits ALL Disc wheels. Works so well it’s an everyday-use Presta head. Right-angle design is great for tight areas with Standard Schrader air valves. Firm spring-clip holds at high pressures. Low profile design fits Kids’ bikes, Scooters, and Motorcycles. The Big Quick-Click™ push/pull Tubeless Presta head works with or without the valve core removed for high flow tire seating. Shop duty for long-life Presta inflation.
Quality
Prestaflator is engineered specifically for the needs of bicycles and bicyclists. Only top-quality materials are used for its components. We start with a cast Aluminum body and give it a bead-blasted finish. Next, we use 6061-T6 Alloy, Chrome, and Stainless Steel components for all connectors and moving parts. The hose is made of reinforced polyurethane. It’s 3X more flexible than our original Black hose and is rated for 300 PSI of continuous use. Smooth alloy clamps on the hose are more comfortable for use of the spinner head and are corrosion resistant.
Serviceability
Prestaflator Digital Tire Inflator is designed to offer years of reliable service. The body has a 1/4” male threaded BSP adapter so you can install many types of connectors. You can typically get these from bunnings to suit your required airline.
The hose, trigger, and pressure release mechanisms are all threaded and installed using #7 O-Rings. They can all be removed and serviced with a 14 mm wrench. We offer rebuild kits so you can service and maintain your Prestaflator anytime.
The Presta / Schrader heads and couplers are made of 6061-T6 Alloy. They’re as strong as Brass, but only 1/3 the weight. This is no place for plastic. Drop your hose on the concrete with plastic pump heads and they could break. The Presta head connects to your tire valve with our new improved easy-on easy-off “Urethane pump head gasket”. Replacements are available on our website or through any cycling supply source.
Automotive Inflators
Automotive inflators are not the same as Prestaflator and may not be safe at bicycle pressures. They use lower-quality materials throughout, one-time glue assembly, and low-grade plastic pressure gauges to bring down the quality and price. Don’t let a gauge with a high-pressure range fool you … inside the package are safety warnings. Even one with a 230 PSI gauge may only be rated for 70 PSI maximum use. Use one of those on a bike and the weaker seams on the body may crack, the air hose could burst or the connector could blast off the wheel. As soon as one seam or glued seal fails you get no reading from the pressure gauge. Failure and disposal of automotive inflators is common.
Prestaflator is different… a high quality, serviceable tool… designed, built and warranted for use on Bicycles.
Prestaflator Pro Digital Tire Inflator Specifications
- New Rapid Response™ Digital Gauge
- 255 PSI (in 0.1 PSI increments).
- 17 Bar (in 0.01 Bar increments).
- Also provides measurement in MPA and KG/CM units.
- Also Perfect for low-pressure Readings!
- Uses two CR2032 Batteries – tool-less replacement.
- Works as a pressure checker w/ 2way head
- Variable-rate trigger!
- Presta AND included Schrader!
- Professional shop-grade tool.
- 6061-T6 Alloy Presta Head.
- Replaceable I/M compressor quick-release attachment.
- Rubber pressure gauge housing for shock protection.
- Cast aluminum pistol grip handle with bead-blasted finish.
- Two-finger trigger valve for precise air flow regulation.
- Thumb-control pressure release button.
- Braid-reinforced hose is our strongest, most flexible hose.
- Head accepts many thread-on accessory Heads.
- The body accepts any 1/4″ BSP male threaded fitting.
Disclaimers
Air compressor and air hose with quick release connector required for use – not included.
Maximum air pressure is limited by your compressor’s capabilities.
Warranty
Prestaflator warrants all air tool products manufactured by Prestaflator to be free of defective material or workmanship for one (1) year, and under the conditions stated herein. This warranty is expressly limited to the repair or replacement of products found to be defective. Prestaflator assumes no liability for loss due to failure of any product to perform satisfactorily. Prestaflator makes no other warranty, expressed or implied, except that of title. Any and all other warranties are expressly disclaimed.
This warranty applies under conditions of intended use and is exclusive of equipment subjected to Failure to follow recommended assembly and service procedures, Lack of proper maintenance, excessive duty cycle, exposure to the elements, shipping damage, and modification not authorized by Prestaflator. No warranty claims will be honored without prior authorization for repair from Prestaflator. Any replaced or repaired equipment will be warranted for the remainder of the warranty term only.
Weight | .350 kg |
---|---|
Brand |
1 review for Prestaflator Digital Bicycle Tire Inflator – Air Compressor Tool
Add a review Cancel reply
You must be logged in to post a review.
John Cumming (verified owner) –
At first I thought I was having the same old difficulties with Presta valves but it just takes a bit of getting used to working the gauge. On the second attempt (when I wasn’t in a rush) it worked really nicely. It’s not cheap, especially given it is made in China (which is not necessarily a criticism these days). Given I already have an automotive schrader inflator/gauge that cost about the same. I really have over capitialised. I’ve also been told that Presta manual floor pumps are a good, effective and more affordable option. It’s too soon for me to comment on its durability/reliability. and it is a nice bit of kit and does seem well made, so hopefully you do get what you pay for with this.